Snappy Print — Digital Envelope Reference

Snappy Print — Xante Impressia iQueue settings, OPC SKUs, and fuser cam procedure

Catalog envelopes — fuser cam adjustment required

Before running any catalog or booklet envelope, the fuser cam must be opened to widen the roller gap. Always reset the cam after the job — leaving it open causes fusing problems on all other media.

1Allow the machine to cool — the fuser runs very hot

2Remove the fuser unit from the machine

3Locate the cam sticker on the non-operator side of the fuser

4Turn the cam counter-clockwise until the small red flag appears — this opens the roller gap

5Reinstall the fuser and run your catalog job

6After job: reset cam to original half-circle position before running any other media

iQueue media weight scale

Key reminders

Windows must be laser-safe / digital-rated

Poly windows melt in the fuser — do not run

Envelopes under 8.5" wide print at 25 ppm

If toner rubs off, go up one iQueue weight setting

Load envelopes flap up, flap entering last

Do not fan or thumb envelopes before loading

OPC SKUs from Omaha Paper Co. pricing sheet dated March 5, 2026 — verify against current quotes. iQueue setting numbers are typical for the Xante Impressia; confirm number-to-label mapping in your Printer Settings module. Fuser cam procedure from Xante's official FAQ.